Install Instructions

For most products there are only 2 steps: Peel and Stick

For those who like to plan ahead, use the following materials and steps.

Materials: Urban Cave Graphic, Painter’s Tape, Level, Pencil

Step 1. Clean your wall with a damp cloth and allow the wall to dry completely

Step 2. Cut apart any individual pieces of the graphic

Step 3. Use a level or straight edge along your wall and lay out your graphic in its desired orientation (with the backing against the wall) and attach it to the wall in several places with painter’s tape.

Step 4. Use a pencil to mark the edges of the graphic onto the painters tape

Step 5. Carefully remove the painter’s tape from the graphic leaving the tape attached to the wall

Step 6. Peel one graphic section at a time away from the backing paper and carefully stick it to the wall, lining it up with the painter’s tape markings. Smooth the graphic using the palm of your hand. For large areas, smooth it from the center and work your way to the edges.

Step 7. If any wrinkles or bubbles are seen, simply pull up the graphic in that area and reapply, smoothing out the area as you go.

Removal Instructions

Step 1. Carefully peel back an edge of the graphic.

Step 2. Roll the graphic back on itself as you slowly pull it off of the wall.